Evolution and Development of Public Architecture in the Punjab Communication & Works Department

Article Sidebar

PDF
Published: Jun 22, 2016

Main Article Content

Z. Ashraf
Neelum Naz

Abstract

Public Architecture identifies and solves practical problems of human interaction in the built environment and acts as a catalyst for public discourse. Pakistan has a significant long architectural history however, public architecture set its pace in the Punjab during British Period with the establishment of Public Works Department (PWD) in 1849. A separate branch of Buildings and Roads was created in April 1899; succeeded by the Communication & Works (C&W) department in 1962. The engineers were considered competent for designing and execution of buildings without the help of an architect. With the increase in the building activity the need of a Consulting Architect was felt. Basil Martin Sullivan from Britain was appointed as Consulting Architect to Govt. of the Punjab in 1914. Since then the public sector architects have professionally designed many important buildings, but there is no documentation available for ready reference. It seemed like the architecture of a lesser value. The time has come to take it seriously and acknowledge the contribution made by this department over the years. The paper is just a humble beginning on the subject and will attempt to delineate the historical perspective in a chronological, albeit overlapping sequence. The first author’s long experience in the C & W Department acted as a catalyst in generating the desired information coupled with the Archives of the office of Chief Architect. The research paper will be beneficial in providing a baseline for conducting further research on public architecture in Pakistan and the region.

Article Details

Issue
2009: Volume 5 JULY 2009
Section
City and Regional Planning, Environmental Engineering, Architecture

References

V. Tare, S. Gupta and P. Bose; J. of Air and Waste Management Association, 53(2003) 976-982.

M. S. Ahmad; Biological Treatment of Tannery Wastewaters, M.Sc Thesis, Institute of Environmental Engineering and Research, UET, Lahore, 2002.

W. W. Eckenfelder; Industrial Water Pollution Control, McGraw-Hill International Edition, Singapure, 2002.

A. J. K. Jawahar, J. K. S. Ponselvan, M. Chinnadurai and G. Annadurai; Indian J. Environ. Protection, 18(1998) 672.

V. Murugesan, and R. Elangoan; Indian J. Environ. Protection, 14(1994) 511.

D. B. Emerson and N. L. Nemerow; Proceeding of the 24th Purdue Industrial Waste Conference, Purdue University, Lafayette, Indiana, (1969) 867-879.

M. Iqbal, I. Haque and J. A. S. Berns; The Leather Sector, Environmental Report, Environmental Technology Programme For Industry (ETPI), Federation of Pakistan Chambers of Commerce and Industry, Federation House, Karachi, Pakistan, 1998.

S. Haydar; Determination of Kinectic Coefficient for the Biological Treatment of Tannery Wastewater, M.Sc Thesis, Institute of Environmental Engineering and Research, University of Engineering & Technology, Lahore, 2004.

Standard Methods for the Examination of Water and Wastewater, 18th Edition, APHA, AWWA, WEF, 1998.

J. F. Wilkison, Introduction to Microbiology, Halsted Press, a Division, 2000. of John Wiley & Sons, Inc., New York, 1975.

L. D. Benefield and C. W. Randall; Biological Process Design for Wastewater Treatment, Prentice-Hall, Inc., Englewood Cliffs, N.J., 1980.

D. S. Parker and M. S. Merrill; Jour. Water Pollution Control Fed., 48(1976) 2511.

M. Bosnic, J. Buljan and R. P. Daniels; Pollutants in Tannery Wastewater, United Nations Industrial Development Organization (UNIDO), Regional Programme for Pollution Control in the Tanning Industry in South-East Asia, report US/RAS/92/120, 2000.