General Considerations Regarding Scattering of the MRI RF Field by Implanted Medical Devices

Article Sidebar

PDF
Published: Jun 22, 2016

Main Article Content

S. A. Mohsin
N. M. Sheikh
F. Mahmood
W. Abbas

Abstract

The electromagnetic scattering problem posed by the interaction of the magnetic resonance imaging (MRI) RF field with a medical implant in tissue is explored. An exact formulation is computationally expensive since the domain includes all of the body tissue, the implant, the air region, and the surfaces of the RF coil conductors. It is shown that a division of the problem into two parts makes it more amenable to a numerical computation. In the first part, the RF field in the presence of body tissue only is found, and in the second part, the RF field that has already been computed is used as the incident field in the presence of the implant. Taking this incident field approximation into account, a domain simplification approximation is presented. A nonhomogeneous tissue layer surrounding the implant is considered and it is shown that then it is no longer necessary to integrate over all of the body tissue, and that the errors introduced due to this approximation are small enough to be considered as negligible. Numerical results validating the approximations are also presented.

Article Details

Issue
2010: Volume 6 JAN 2010
Section
Electrical Engineering and Computer Science

References

G. Fischer, Victor C. Li., 2007, “Effect of fiber reinforcement on the response of structural members”, Engineering Fracture Mechanics, 74, pp 258-272.

A. Carpinteri, A. Spagnoli, S. Vantadori, 2006, “An elastic-plastic crack bridging model for brittle-matrix fibrous composite beams under cyclic loading”, International journal of solids and structures, 43, pp 4917-4936

Campione G., Letizia Mangiavillano M., 2008, “Fibrous reinforced concrete beams in flexure: experimental investigation, analytical modelling and design considerations”, Engineering structures, 30, pp 2970-2980

G. Campione, S. Mindess and N. Banthia., 2000, “Monotonic and cyclic flexural behaviour of medium and high strength fiber reinforced concrete”, Fiber reinforced concrete (FRC) BEFIB’ 2000, Proceedings of the fifth international RILEM symposium, pp 461-470

S. N. Sinha, K. S. Naraine, 1991, “Energy dissipation in brick masonry under cyclic biaxial compressive loading”, Proc. Instn Civ. Engrs, Part 2, 91, pp 173-181

A. Filiatrault, S. Pineau, and J. Houde., 1995, “Seismic behaviour of steel-fiber reinforced concrete interior beam-column joints”, ACI Structural journal, V.92, No.5

H. Kimura, Y. Ishikawa, A. Kambayashi, and H. Takatsu., 2007, “Seismic behaviour of 200 MPa Ultra-High-Strength steel-fiber reinforced concrete columns under varying axial load”, Journal of Advanced Concrete Technology, Vol.5, No.2, pp 193-200

L. Daniel, A. Loukili, and J. Lamirault., 2000, “Experimental behaviour of high strength fiber concrete beams under cyclic and alternated loadings”, Fiber reinforced concrete (FRC) BEFIB’ 2000, Proceedings of the fifth international RILEM symposium, pp 577-586

K. Holschemacher, T. Muller., 2007, “Influence of fiber type and concrete composition on properties of steel fiber reinforced concrete”, Proceedings of International conference on “Advances in cement based materials and applications in civil infrastructure (ACBMACI)” Lahore-Pakistan, December 12-14, 2007, pp 633-642.

Durgesh C. Rai, 2000, “Future Trends in earthquake-resistance design of structures”, Current Science, Vol. 79, No.9, pp 1291-1300

F. Buyle-Bodin and M. Madhkhan, 2002, “Performance and modelling of steel fibre reinforced piles under seismic loading”, Engineering Structures, 24, pp 1049-1056

C. Redon; and J-L Chermant, 1999, “Damage mechanics applied to concrete reinforced with amorphous cast iron fibers, concrete subjected to compression”, cement and concrete composites, 21, pp 197-204.

Weichen Xue, Liang Li, Bin Cheng., and Jie Li, 2008, “the reversed cyclic load tests of normal and pre-stressed concrete beams”, Engineering Structures, 30, pp 1014-1023

Abdelsamine S., and Tom B., 2010, “seismic behaviour of 150 MPa (22 ksi) concrete flexure elements”, ACI Structural Journal, Vol.107, No.3, pp 311-320

Verderame G.M., et al., 2008, “Seismic response of r.c. columns with smooth reinforcement Part II: Cyclic tests”, Engineering structures, 30, pp 2289-2300

Abdelsamine S., and Tom B., 2010, “Hysteresis energy and damping capacity of flexural elements constructed with different concrete strengths”, Engineering Structures, 32, pp 297- 305.

L. Daniel, and A. Loukili, 2002, “Behavior of high strength fiber-reinforced concrete beams under cyclic loading”, ACI Structural journal, V.99, No.3, pp 248-256

R. Hameed; A. Turatsinze; F. Duprat; and A. Sellier, 2010, “A study on the reinforced fibrous concrete elements subjected to uniaxial tensile loading, KSCE Journal of Civil Engineering, 14 (4), pp 547-556.