Methodology for Geomorphic Assessment of Alluvial Channels in Oil Sands Region - A Case Study

Article Sidebar

PDF
Published: Jun 22, 2016

Main Article Content

Muhammad Ashiq
Saqib Ehsan

Abstract

This paper explains procedure devised and used for the design of dynamic system for geomorphic studies in the Oil Sand Regions (northern Alberta, Canada), comprising Muskeg, and deals with geomorphic investigation, scientific issues and technical complexities, approach and methodology. Conventional approaches for design of reclamation drainage systems often provide rigid, non- erodible drainage facilities that are designed to handle specific extreme flood events. The alternative to rigid systems designed for specific extreme events is a dynamic system capable of accommodating evolutionary changes without accelerated erosion or unacceptable environmental impacts, a geomorphic approach. Development of this approach requires a comprehensive field investigation, afterward analysis and development of design equations for the design of streams to restore them back into preexcavation form - this study provides a systematic procedure to the solution.

Article Details

Issue
2011: Volume 8 JAN 2011
Section
Civil Engineering,Structures, Construction, Geo technology, Water, Transportation

References

C. Arslanturk, A. Feridum Ozguc, Optimization of a central – heating radiator, Applied Energy , Volume No. 83, pp 1190 – 1197, 2006

D. G. Charyulu, G. Singh, J.K. Sharma, Performance evaluation of a radiator in a diesel engine – a case study, Applied Thermal Engineering, Volume No. 19, pp 625 – 639, 1999.

V. Singh, V. Aute, R. Radermacher, A heat exchanger model for air-to-refrigerant fin-andtube heat exchanger with arbitrary fin sheet, International journal of refrigeration, Volume No. 32, pp 1724 – 1735, 2009

H. T. Chen, W.L. Hsu, Estimation of heat transfer coefficient on the fin of annular – finned tube heat exchangers in natural convection for various fin spacing, International journal of heat and mass transfer, Volume No. 50, pp 1750 – 1761, 2007

B. Kundu and P. K. Das, Optimum dimensions of plate fins for fin – tube heat exchangers, Int. J. Heat and Fluid Flow, Volume No. 18, pp530 – 537,1997

C. Arslanturk, Optimum design of space radiators with temperature-dependent thermal conductivity, Applied thermal engineering, Volume No. 26, pp 1149-1157,2006

Z. Gang Qi, Jiang-ping Chen, Zhi-jiu Chen, Parametric study on the performance of a haet exchanger with corrugated louvered fins, Applied thermal engineering, Volume No. 27, pp 539 – 544, 2007.

W. M.Kays and A.L.London , Compact Heat Exchangers, 3rd Edition, John Wiley and sons, 1998

Incopera, DeWitt et al., Fundamental of heat and mass transfer, 6th Edition, John Wiley & Sons,2006.

M. Tall, I. Bulatov et al. Cost estimation and energy price forecasts for economic evaluation of retrofit projects, Applied thermal engineering, 23, pp 1819-1835, 2003

H.-P.l Schwefel, H. G. Beyer, Evolution Strategies a comprehensive introduction, National Computing 1: pp, 3-52, 2002.