Cost Comparison of Inverted Tee Girder with I-Girder: A Case Study of Shalimar Flyover

Article Sidebar

PDF
Published: Jun 22, 2016

Main Article Content

Asif Hameed
Umer Farooq
Asad-ullah Qazi
Burhan Sharif

Abstract

A study is conducted to compare cost, construction time frame and safety of the inverted-T Girder design concept used in the design of Shalimar Flyover with conventional I-girder. First, the superstructures with NHA (National Highway Authority) ‘Type H’ I-girder at five different centre to centre spacing are designed and the one at 2.75m is found to be the most economical for the span used at Shalimar Flyover. Secondly the economical I-girder superstructure is compared with the InvertedT girder superstructure used at Shalimar Flyover at 1m centre to centre spacing and it is observed that the inverted-T girder at 1m c/c spacing is 22.64 % more expensive than the I-girder super structure at 2.75m c/c spacing. However, the Inverted-T girder super structure is lesser in depth and requires lesser number of spans for the same reach than the I-girders. This reduces land acquisition cost which in turn affects the total cost of the project. The Inverted-T girders are also checked at different spacing and it is found that the same girder section at 1.3m centre to centre spacing is 9.06 % economical than the adopted 1m c/c spacing of the girders at Shalimar Flyover.

Article Details

Issue
2012: Volume 10 JAN 2012
Section
Civil Engineering,Structures, Construction, Geo technology, Water, Transportation

References

Zener, C. (1955), "Impact of Magnetism Upon Metallurgy", Trans. Inst. AIME, Met. Div., pp. 619-630.

Samuel, A.M., Liu, H. and Samuel, F.H. (1993), “On the castability of Al‐Si/SiC particle reinforced metal matrix composites: Factors affecting fluidity and soundness”, Composite Science and Technology, Vol. 49, Issue 1, pp.1- 12.

Wannasin, .J. (2005), “Fabrication of metal matrix composites by a high-pressure centrifugal infiltration process”, Journal of Materials Processing Technology, Vol. 169, pp. 143-149.

M.R. Chen, S.J. Lin, J.W. Yeh, S.K. Chen, Y.S. Huang, C.P. Tu, Mater. Trans 47 (2006) 1395– 1401

Rohatgi, P.K. (1994), "Low-cost, Fly-AshContaining Aluminum-Matrix Composites", JOM - The Member Journal of TMS, v. 46, n. 11, pp. 55-59.

Rohatgi, P.K., Sobezak, J., Asthana, R. and Kim, J.K.(1998), “Inhomogeneities in silicon carbide distribution in stirred liquids-water model study for synthesis of composites”, Materials Science and Engineering , Vol.252 (1), pp. 98-99.

J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, S.Y. Chang, Adv. Eng. Mater 6 (2004) 299–303.

Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes, Adv. Eng. Mater. 6 (2004) 299–303. J.W. Yeh, Recent progress in high-entropy alloys, Ann. Chim.: Sci. Mat. 31 (2006) 633– 648.

J.W. Yeh, S.Y. Chang, Y.D. Hong, S.K. Chen, S.J. Lin, Mater. Chem. Phys. 103 (2007) 41–46.

M.H. Tsai, C.W.Wang, C.H. Lai, J.W. Yeh, J.Y. Gan, Appl. Phys. Lett. 92 (2008) 3.

Poole, W.J. and Charras, N. (2005), “ An experimental study on the effect of damage on the stress-strain behavior for Al-Si model composites”, Material Science & Engineering, Vol. 406 (1-2), pp. 300-308.

C.J. Tong, M.R. Chen, J.W. Yeh, S.J. Lin, S.K. Chen, T.T. Shun, S.Y. Chang, Metall. Mater. Trans. A 36 (2005) 1263–1271.

Quin, S., Chen, C.and Zhang, G. (1999), “The effect of particle shape on ductility of SiC reinforced 6061 Al matrix composite”, Material Science and Engineering, Vol. 272(2), pp. 363- 370.

Ourdjini, A., Chew, K.C. and Khoo, B.T. (2001), “Settling of silicon carbide particles in case metal matrix composites”, Journal of Materials Processing Technology, Vol. 116 (1), pp. 72-76.

C.J. Tong, Y.L. Chen, S.K. Chen, J.W. Yeh, T.T. Shun, C.H. Tsau, S.J. Lin, S.Y. Chang, Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements, Metall. Mater. Trans. A 36A (2005) 881–893.

M. Shinn, S.A. Barnett, Appl. Phys. Lett. 64 (1) (1994) 61.

X. Chu, M.S. Wong, W.D. Sproul, S.A. Barnett, Surf. Coat. Technol. 57 (1993) 13.

C.Y. Hsu, J.W. Yeh, S.K. Chen, T.T. Shun, Metall. Mater. Trans. A 35 (2004) 1465–1469.

P.K. Huang, J.W. Yeh, T.T. Shun, S.K. Chen, Adv. Eng. Mater. 6 (2004) 74–78.

C.J. Tong, Y.L. Chen, J.W. Yeh, S.J. Lin, S.K. Chen, T.T. Shun, C.H. Tsau, S.Y. Chang, Metall. Mater. Trans. A 36 (2005) 881–893.

C.J. Tong, M.R. Chen, J.W. Yeh, S.J. Lin, S.K. Chen, T.T. Shun, S.Y. Chang, Metall, Mater. Trans. A 36 (2005) 1263–1271.

M.H. Tsai, C.W.Wang, C.H. Lai, J.W. Yeh, J.Y. Gan, Appl. Phys. Lett. 92 (2008) 3.

H.Y. Chen, C.W. Tsai, C.C. Tung, J.W. Yeh, T.T. Shun, C.C. Yang, S.K. Chen, Ann. Chim. Sci. Mat. 31 (2006) 685–698.